|
I know there have been posts about this. I know you might all wanna call me bad names. I searched the archives and found not alot on the small tachs, just the large ones. I am looking for clear, concise and complete instructions for installing a 52mm Small Tach I just got from E-Bay.
On the Back at the top is the wiring for the lamp. There is a BLACK wire and a GREY (or really faded WHITE wire).
On the Back at the bottom is a Three wire group or cluster. The BLACK wire from the lamp comes down and plugs into the Negative Side of the 3 wire grouping. There is a RED/BLUE Wire coming off the Positive Terminal. There is nothing on the terminal marked "G". Please help me out with clear and complete instructions if you can. I would be more than happy to make a Wiring Diagram for the Board for future reference since this is not mentioned in the FAQ.
Todd :-)
--
'90 245 182k
|