Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Brake fluid flush ... any special procedure for ABS? 200 1993

posted by  Ken C on  Sun Mar 7 10:37 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 11:39 CST 2014
[RELATED]

In conjunction with my recent post about a strange brake pedal feel, I was wondering if I had done my brake fluid flush adequately or properly.

I used a positive pressure method (fluid under pressure forced in the M/C), rather than the vacuum method ("sucking" fluid out through the bleeders).

But I just did the usual procedure (opening caliper bleeders). I was wondering, should I have done something specific regarding the ABS unit? I couldn't find a bleeder on the big ABS "box" -- should I have "pounded the brake pedal" or something else to ensure that I also flushed the fluid inside various "cavities" or passageways inside that big ABS box?

In advance, Thanks.

Ken C.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Brake fluid flush ... any special procedure for ABS? [200][1993]
posted by  Ken C subscriber  on Sun Mar 7 10:37 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.