Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

EMERGENCY!!!!Brake light after changing all rotors and pads, and bleed...... 200

posted by  Gauvain on  Fri Mar 19 09:40 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Ok OK, so the pedal goes to the floor, I just changed all rotors and pads and did a full bleed before start up with a bleeder pressure kit...

After I just drove it should I rebleed everything now, will this make the light go away?...it is a new MC, I just changed it about 2 months ago...HELP PLEASE!!!!!

Robert

Oh by the way, I pushed the calipers in for the pads to fit...is this why i need to bleed again after runnin motor????

This FAQ says to pull switch and then press pedal then push pedal...then screwing the switch back in...sound good?





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New EMERGENCY!!!!Brake light after changing all rotors and pads, and bleed...... [200]
posted by  Gauvain  on Fri Mar 19 09:40 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.