Hello, And thanks in advance, I have posted before about this, but I am finally in need of brake lights, Just a little background, I know for a fact that the housing connections are corroded, so that could have been the origional problem, second, I have gone multiple times to fuse #4 or 5 that is labled "brake lights" and if you check the voltage on the "front" connector to the fuse, it claims about 2.92 volts when the pedal is depressed, the one connector towards the back of the car has a constant 12.5 or whatever the car is at (more like 13.67 if it is running) I believe that the switch that doubles as a shift lock switch works, but I thought that I tested the orange and orange/white wires that go to it, and they had no voltage, I think that my bulb failure relay is ok, because one of the rear running lights was not working, and the BF light came on. I have read some other posts about the same types of things on a 7oo series car, and the person talked about continuity between a 54, 57, and 57B or something, I also know that the ground wires are good. Another weird occurance, is that if I test the wire that I believe is for the brake light, (on the drivers' side atleast) there is continuity to the ground wire??!?!?!

anything you have for imput is helpful....

Thanks Again,
Tim

P.S. If a picture or anything would help, let me know...