Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2002 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Front cam seal - 93' 940T 900

posted by  someone claiming to be D-squared on  Thu Mar 25 07:42 CST 2004 [RELATED]

What is the easiest way of replacing the front cam seal - does the seal pull out from the front after I remove the cam sprocket ? Or do I need to pull the valve cover off and push it through from the inside ? In the FAQ's it was mentioned that you need to remove the #1 bearing cap on the cam shaft so I'm a little confused.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Front cam seal - 93' 940T [900]
posted by  someone claiming to be D-squared  on Thu Mar 25 07:42 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.