Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Building Custom Exhaust where to start? (81 245 B23E) 200 1981

Hey all,
I am still in mid restore on my 81 Brick for those of you who remember my thread back in December.
http://www.brickboard.com/RWD/index.htm?id=717163

The car is progressing very slowly...but should be done by the end of April. I am just trying to figure out the exhaust, and how I want it built. I am using the standard Volvo manifold, but from there, I am not certian. Here are the options:
1) 2.5" custom from the Manifold
2) 2.5" custom attaching at the end of the standard Volvo manifold & downpipe

both of these options are going to run dual mufflers running under the passenger side and then straight out the back passenger side. My question here is more focused on whether or not to go from the Manifold with the custom, or from the Manifold and volvo downpipe to custom.

All thoughts are appreciated...
Cheers,
-Phil
--
Phil Sinnott '81 245 630,000kms






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Building Custom Exhaust where to start? (81 245 B23E) [200][1981]
posted by  North Shore Brick subscriber  on Thu Apr 1 04:36 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.