|
The A/C on my '94 940 isn't working, and it's fixing to get hot here in the south so I ran a couple of tests and pulled the control unit to re-solder any bad joints. After repairing the solder joints for the little relay it is still not working. I get power to the pressure switch on the accumulator, but the cable going to the compressor clutch is dead even with a jumper on the pressure switch. I've been looking at the diagrams on the haynes book, but I can't even find the relay that is supposedly between the pressure switch and the compressor! Anyways, I figure a lot of you guys have a lot more experience working on these things and might be able to give me a hint or two as to what to do next.
Regards,
Wilhelm
|