Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2009 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Intake (molded) hose 745T 700 1989

posted by  NJC on  Sat Apr 17 07:39 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Jul 24 13:42 CST 2011
[RELATED]


I've noticed the turbo intake hose has developed a hole where the PCV pipe connects. It is oil soaked but the turbine bearings seem OK. The vacuum line from Y pipe on top of oil trap is broken so crank gases weren't getting drawn into manifold at all.

I blew backwards threw oil trap with filler cap off and it's clear. (I DO notice that I have positive pressure from oil filler which I why I started to snoop around).

My question is this: What noticeable effect in engine performance will a hole in the turbo intake have? I was quoted $225 Canadian dollars for this hoses. Ugh.

Any comment appreciated. Thanks in advance

Norm Cook





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Intake (molded) hose 745T [700][1989]
posted by  NJC  on Sat Apr 17 07:39 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.