Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Power Trunk Release 200 1983

posted by  EGIII on  Mon Apr 19 15:49 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I have a 1983 244T that did not come equiped with a power trunk release. I installed a trunk release motor from an early model 240 that I salvaged from a local yard. After wiring the motor and trunk release button it seems that there should be some type of relay or control to allow the motor to make the proper revolution. My motor turns for as long as the trunk release button is pushed. This will allow the trunk release to open the trunk ,but doesn't set the trunk lock back to the locked position. Also I am wondering if a motor from a late model 240 would allow my trunk to properly unlock and lock.
--
EGIII "1983 244 Turbo"






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Power Trunk Release [200][1983]
posted by  EGIII  on Mon Apr 19 15:49 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.