Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2005 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Loosening Turbo-Ex manifold bolts PS 700 1989

posted by  Azureblue on  Tue Apr 20 04:04 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I got a closer under car look at the widening gap between the Turbo and the exhaust manifold and found the problem is the bolts were coming unscrewed- loose keepers, etc.. Well, if it weren't for the block and the manifold,, this would be easy to fix, but back to reality... Is there a way to get in there and tighten the bolts without removing the manifold. Looks impossible to me, but I'm not up on these things.

If I have to R&R, do I need to replace the studs- that is, if they don't break, the turbo bolts, and is there anything else in there I should preorder before I go in?

And where can I order the parts I need? Is Volvo the best source?

Rick






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Loosening Turbo-Ex manifold bolts PS [700][1989]
posted by  Azureblue  on Tue Apr 20 04:04 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.