Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

'89 240 Brake Change Help 200

Hello All!
This is my first time posting on this board, but I am looking forward to knowing all of you. Ok, so here's my question. I have a 1989 Volvo 240, and I really need to change the pads on it. I dont have the money to take it to get fixed, so I was planning to do it myself. I am generally familiar with changing pads, but I just wanted to know if there were any specific tricks or tips to do it on this 240. Because I am in College and I dont really have all my tools, I will have to go borrow them from O'Riellys or AutoZone or something, so I was curious if you guys knew the specific Tools I will need. I will of course need a ratchet, but could you guys help me with the specific socket size? Will I need any of the large allen wrenches? I assume I will also need a C-clap to compress the piston. Will I need to bleed the lines? When I had done it on my old car (1984 Firebird), I just took off the cap from the resevior, and compressed the piston. Is there any write ups or instructions on how to complete this brake change? I am really wanting to do this myself, and KNOW how to do it. Basically I just need generic help!

Thank you for any information,
Nathan






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New '89 240 Brake Change Help [200]
posted by  Fallchild000  on Thu Apr 29 11:55 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.