i just picked up a new radiator and found out a couple things. the rad is listed as brass and copper construction. but all the ones at carquest were made up of plastic and aluminum. it is a single row that is the size of two fo them. the trans lines were slightly further apart. no big deal. but the molded mountings points at the bottom and top were not there. the fit into the rubber mounts was off by 5/16 of an inch or so. i had to use pieces of old rubber air tubes to makeup the difference. the rad was too loose and i was afraid it would shift and break the hose connection. the bottom hose was too tight of a fit between the tube and body metal

benjamin