Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

New Master Cyl. New Rotors/pads, bled brakes, pedal still hits floor 200

posted by  someone claiming to be Nathan on  Thu May 20 10:19 CST 2004 [RELATED]

Well thanks for the help, the car is a 1991 I'm not sure if its ABS (how do tell). The fluid was not contaminated. And yes the pedal feels spongy. It travels to the floor with slight resistance as opposed to falling to the floor and it is not overly diffucult to depress. I bled the lines after changing the cylinder but its possible that I fouled up the sequence. My Haynes man. is a bit muddled as to the sequence. If someone could pass along what Bentley says I'd be greatful. I have three days to make this car run and sell it...





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New New Master Cyl. New Rotors/pads, bled brakes, pedal still hits floor [200]
posted by  someone claiming to be Nathan  on Thu May 20 10:19 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.