Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Rear Axleshaft and bearing assembly 200 1986

uid 24984's pic
posted by  Yellow Brick Road on  Sun May 23 10:00 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

My brake job evolved into something a bit more serious. (Funny how that seems to happen...) With caliper, rotor and ebrake removed, I noticed a serious leak around the retaining plate / outer seal. I've removed the axleshaft and bearing assembly. Haynes (section 8-11) says it is easiset to take the assembly to a machine shop to change the old locking ring, bearing and seal. Is it best to call the local Volvo dealership to ask who they use as a machine shop, or is this a job just about any machine shop can handle, even if they (gasp!) have never worked on bricks??? Thanks in advance for your replies!!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Rear Axleshaft and bearing assembly [200][1986]
posted by  Yellow Brick Road subscriber  on Sun May 23 10:00 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.