Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

AC compressor won't engage 200 1992

posted by  Herb Goltz on  Tue May 25 08:13 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 13:23 CST 2014
[RELATED]

Hello all:

The compressor on my '92 245 will not engage on its own. I can get it to run by (briefly) jumpering the low-pressure switch on the accumulator. I am not equipped to test for pressure in the system at home, but I did trace all the lines and had a close look at the condenser-- everything looks fine-- no black goo or oil on any of the joints.

I know that this is a classic symptom of low system pressure, but are there other things I can rule out first? How do you test the low pressure switch? Are there any relays that I should examine-- if so, where are they located? Again, this is a '92 with the later 700/900 style AC.

Any/all wisdom would be appreciated!
--
Herb Goltz, London, Ontario, Canada '92 245 w/102K mi






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New AC compressor won't engage [200][1992]
posted by  Herb Goltz  on Tue May 25 08:13 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.