Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Swapping AMM and ECU 200 1991

posted by  gadfly151 on  Wed Jun 9 06:39 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Mar 5 05:47 CST 2009
[RELATED]

I am trying to diagnose a faulty AMM (Has been tested on a multi-meter)and or ECU.I am SURE that I have no wiring problems as I tested all inputs on ECU harness and all checked out to spec per Bentley as well as replacing the RPM sensor. I am planning on swapping out the components from a known good car. Do I run a risk of frying the AMM if I have an ECU related problem? Also, Can I fry other components (Fuel and Ignition ECU) by swapping? Thanks again...
--
1991 245 130k-(Volvo number 4)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Swapping AMM and ECU [200][1991]
posted by  gadfly151  on Wed Jun 9 06:39 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.