Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2008 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Finally solve my problem, but.... 200 1983

posted by  edmartz on  Sun Jun 20 11:09 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Jul 21 17:04 CST 2009
[RELATED]

Hi,
Last week I post a message when the frenquency valve doesn't work, and yesturday with a dwell I test it, and the problem was the mixture, so high!!!
I set a right mixture but today, when cold my brick stops dudenly...
I note the problem was the thermal cut-out switch (pin#7 on the ECU), not ground this and the lamda system doest know when cold. I ground it and start fine!!, now my problem is I spent about 3 hours finding this sensor and I didt.
Does any knows where to find it on a b21ft turbo 1983?
Thanks!


Edwin






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Finally solve my problem, but.... [200][1983]
posted by  edmartz  on Sun Jun 20 11:09 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.