Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Air Con belt slashed to change fan belts 200 1979

posted by  Klaus Fluoride on  Sun Jun 27 14:32 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Mar 30 15:07 CST 2009
[RELATED]

While changing my fan belts yesterday, I spent a very frustrating hour trying to work out how to loosen the air con compressor belt to remove it so I could get the fan belts on.
I wound up cutting the bloody thing off (thankfully, it's winter here in Australia) to get access, safe in the knowledge someone on this site will know how to do it before summer gets here!
How the hell do you loosen the tension of the A/C belt? For the life of me I can't see a bolt similar to that which adjusts the alternator.

The reason I was changing the belts was my amp light intermittently comes on, and the battery when the engine is running only puts out 11.5 volts. The belts were in very bad shape but it hasn't fixed the problem. A friend suggested I start the car and then disconnect the battery, if it stalls the alternator is not working properly. Any truth in this? I've checked fuses. Could it be the battery? Any ideas anyone

Cheers
Klaus
Adelaide, Australia






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Air Con belt slashed to change fan belts [200][1979]
posted by  Klaus Fluoride  on Sun Jun 27 14:32 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.