Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2012 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

SU Guru's please 120-130

uid 7678's pic
posted by  Yvan Lacroix on  Mon Jun 28 07:04 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 3 13:45 CST 2014
[RELATED]

Hello I am having a new-to-me problem with my carb's. The rear carb (B18D) float bowl cover has sprung a leak so to speak. Where the fuel enters the cover about 3/8 of an inch lower there is a hole(vent I assume) that the fuel has started to flow out of strongly. Previous to this starting I had removed both floats and cleaned the needles and seats(with carb cleaner and compresed air) due to a sticking needle. With finger pressure the needle seams to seat. At this time I also removed the sludge at the bottom of the float-bowls. What did I do wrong? Any thoughts?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New SU Guru's please [120-130]
posted by  Yvan Lacroix  on Mon Jun 28 07:04 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.