Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2004 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

How to pull an AC pulley and clutch 700

uid 14228's pic
posted by  ladeadhead on  Mon Jun 28 15:08 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Nov 6 17:34 CST 2007
[RELATED]

Well, I am finally getting around to fixing my AC (the convincing factor being Southern california sun) and I know that all I need to do is replace the clutch and the pulley and bearing. I have heard that I take off one nut, then a snap ring, and then use some special tool to pull everything off. Do I actually need a special tool or will a gear puller do? Any procedural suggestions would be greatly appreciated.

Thanks,

Eamon
--
'Where's your common sense?' 'It left me when I was 5' http://members.sounddomain.com/ladeadhead






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New How to pull an AC pulley and clutch [700]
posted by  ladeadhead  on Mon Jun 28 15:08 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.