Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

cruise control 200 1991

posted by  rf64 on  Thu Jul 1 15:32 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Mar 10 14:44 CST 2009
[RELATED]

I started to install cruise control in my 1991 volvo 240.My car was already set up for it because it had the bracket behind the knee bolster for the(brain)the tubing through the firewall to connect to the vacumm pump.This is where I am;the brake dump is in the gas pedal air diaphram ,and all of the air tubing lines are connected. I have the (brain) or cruise control computer also installed. The combination turn signal /cruise control activating lever is also installed on the steering wheel. There is supposed to be a wire that connects to the back of the instrument cluster . I am definitlly sure about this . Without that wire connected the brain cant tell how fast the car is going. has anyone done this job and if so what color is the wire that connects to the back of the cluster. I have everything else installed. Is there something I am missing. Please explain the system if you did the same installation and correct me if I missed any thing . The instrument panel wire is the key component I think. Thanks Ron






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New cruise control [200][1991]
posted by  rf64  on Thu Jul 1 15:32 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.