Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Front sway bar bushings 200 1989

posted by  guYom on  Fri Jul 2 05:40 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Jul 5 17:35 CST 2013
[RELATED]

Hello Bricksters,

I have just bought all bushings for the stock front sway bar. I will definitely replace the two bushings that in the 2 brackets afixed to the car. I'll replace the 2 grommets on each side of the sway bar where the sway connects to the end link. Now my question is about the endlink bushing. I have these 2 (one per side). It seems that I may need a press to put in the new ones from looking at the way they are shaped -- I don't have a press, will I still be able to remove the old ones and put in the new ones? Should I bother with these, or just be happy with replacing the rest of the stuff only?

Any other advice and tips welcome on sway bar bushings freshening.

Thanks.
--
'89 244DL M47 161K miles






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Front sway bar bushings [200][1989]
posted by  guYom  on Fri Jul 2 05:40 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.