Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Where does this hose go flame trap? 200

posted by  someone claiming to be Svender on  Fri Jul 2 10:00 CST 2004 [RELATED]

82 B21FT

The three way plasting housing has three ports... One goes to the breather box, the other goes to intake, and the third ("small one") goes where on the manifold?... I don't see anything that stands out... Does it share a connection with another vacuum hose? My original plasting housing was capped with a rubber cap so it did not go anywhere. I replaced the housing because it broke and I got some tubing to connect it to the manifold... Can't find a diagram of where it should connect to the manifold.. Help plz.. Thankyou... Bye the way I did blow down the tube to see if the breather box is clogged... I'm able to blow through with the oil cap off.. There iz a little resistance but maybe there should be? I donno.. or should it be totally free flowing without much effort blowing throught the system...??? Thx again

Svender






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Where does this hose go flame trap? [200]
posted by  someone claiming to be Svender  on Fri Jul 2 10:00 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.