Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Best Source Injector Seals K-Jet? 200 1981

posted by  sejose on  Sat Jul 10 17:17 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Greetings

A while back I replaced injectors, seals and holders on my 81 245 K-Jet B21F. I recently (just a couple days ago) replaced the engine wiring harness. Now I can hear the hiss of a vacuum leak and with a length of fuel hose to my ear I can hear hissing at two of the injector bases at the holders. I bought the holders and seals and injectors from FCP. The holders did not say Volvo on them like my old ones, but the o rings looked ok. Would I be better off going to the dealer or IPD, are they any different?

Thanks

Scott






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Best Source Injector Seals K-Jet? [200][1981]
posted by  sejose  on Sat Jul 10 17:17 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.