Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

What size Ujoints, also... where are the nipples at? 200

posted by  6 volvos in the driveway on  Thu Jul 22 18:23 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

On my 91 240SE I have a m46 from a tranny swap, along with a driveshaft from an older 240 turbo. This has the larger 3.75" diameter flanges that connect on both sides to the tranny and rear axle. What size Ujoints do I order for the car?

Also... do ALL ujoints these days come with grease nipple ports? Are there only certain brands that use them? I have 2 driveshafts in my garage laying around, and out of 6 ujoints, only 1 had a grease nipple hole in it... wtf is up with that?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New What size Ujoints, also... where are the nipples at? [200]
posted by  6 volvos in the driveway  on Thu Jul 22 18:23 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.