Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Finished installing aux. A/C fan, ?'s 200 1988

My there's alot of A/C posts in the middle of the summer...

I got a junkyard Volvo compressor fan and wired it with relay, tripped by the compressor clutch wire. I had never payed much attention before, but the compressor really doesn't run much. Even turned up 3/4, it's maybe 25% duty cycle. Do I need to trip the fan relay from some other source so it run's more often? If I understand A/C system, there is flow through the condensor wheather or not the compressor is pressurizing.

The second question is the fan is loud, and makes the whole car vibrate (the steering wheel rattles even). Do I need to balance the fan or isoloate it somehow? It is a stock Bosch fan, I disassembled, cleaned and lubed bearings.

Thanks,
Peter P.
Portland, OR






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Finished installing aux. A/C fan, ?'s [200][1988]
posted by  Peter P.  on Thu Jul 22 21:04 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.