Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Bad Transmission Mount - Vibration in first gear 200

posted by  DougC on  Wed Jul 28 12:12 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Aug 10 08:30 CST 2014
[RELATED]

One of my son's 81's (M46) had a lot of driveline vibration starting out in first gear. I saw that the driveline support rubber donut mount was shot so I replaced it along with the bearing since it was real rough and hard to turn by hand. This took care of about 60% of the problem. I'm thinking that the remaining vibration starting out in first gear is probably caused by a really soft and mushy rubber transmission mount. Before I crawl under there again, am I on the right track?
--
Thanks everyone for all the information and advice, Doug C. 81 242 Brick Off Blocks, stock, B21F (non-Turbo), M46; 86 244, B230, 140k , auto.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Bad Transmission Mount - Vibration in first gear [200]
posted by  DougC  on Wed Jul 28 12:12 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.