|
Hey Y'all,
As I was updating my cardomain webpage (http://members.cardomain.com/richink73) on the project 242 which is coming along very nicely, I thought I might point out a small tech tip that the previous owner of my 242 failed to follow. It lead me to have to replace 2 sections of floor. First the bit directly below where a blocked A/C drain would spill, and secondly, the depressed area on the outboard side of the passenger floor where it pooled.
Your A/C drain is a little black tube, that if you reference where the inboard patch is in the picture, just follow up the transmission tunnel and under the dreaded 240 HVAC box you will find little guy. Pull it out and flush it with your favourite fluid. Reduces summer A/C stink as well.
DEATH TO RUST!!!!

--
Happy Bricking!!! - Richard - '87 245 DL , '82 242 GLT - Half a million km between them!!!
|