Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Where in the @%&*# did the cannister vacuum Line go? (picture included) 200 1985

posted by  Antiriad on  Sat Jul 31 08:20 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jun 27 09:36 CST 2011
[RELATED]

Guys

I posted about 3-4 days ago about me having problems with cold starts in my 85' 240. Today I opened the hood and I realized that one of the vacuum lines that go to the throttle body was missing. The Bentley manual says that the vacuum line comes from the charcoal canister, however I took a quick look in the engine compartment and I couldn't find the vacuum line. I remember I had used zip ties to hold it down in the past since it was popping out from times to times.

I had problems once or twice before when the vacuum lines in the intake/throttle boddy popped out before but this time the line completly dissapeared.

Where is it routed from? How long is this line and what size, in case I have to get a new one.

Thanks

Mike







THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Where in the @%&*# did the cannister vacuum Line go? (picture included) [200][1985]
posted by  Antiriad  on Sat Jul 31 08:20 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.