Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Drive Shaft Pilot Bearing Replacement ? 200

posted by  Cliff M on  Tue Aug 10 01:37 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat May 31 12:47 CST 2014
[RELATED]

How difficult and are there any tips for replacing the pilot bearing on the drive shaft of a 1986 240 sedan? The bearing is squealing a bit but the rubber mount is toast. I had to jam the loose rubber bits all back together last night as it was causing a nasty driveline vibration. Is this only a dealer part? If the bearing is not too bad, can just the rubber mounting be replaced or is it just as well to replace the bearing at the same time?

Many thanks again in advance.

Cliff





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Drive Shaft Pilot Bearing Replacement ? [200]
posted by  Cliff M  on Tue Aug 10 01:37 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.