Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2005 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Are 140 Panhard rods the same length as 240 Panhard rods? 140-160 1974

posted by  someone claiming to be Ted on  Sat Aug 21 07:02 CST 2004 [RELATED]

I know that the bushings are the same on the '74 140 as on a 240 but I am wondering about the actual length of the bar itself.

I picked up a IPD adjustable panhard rod thinking it would bolt right in. It is three inches to long when adjusted to its shortest length. It measures thirty inches in length from end to end. My old panhard rod is severly bent and its hard to tell how long it would be if straight but it seems it would be a few inches shorter.

I am running VPD lower coils in the back. I tried to fit the IPD panhard rod without springs and shocks but it moves my driveline way to far to the right to the point that is next to the edge of the tunnel.

Everything looks straight. The body, the unibody frame, all brackets and mounting points for shocks, torque rods, trailing arms and panhard rod. Springs, shocks, torque rods and trailing arms are straight. All items have new bushings.

Anyway I am off to the junkyard with my tape measure....very few 140s showing up in the Bay Area yards these days...

Ted
'74 144GL
'59 PV445






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Are 140 Panhard rods the same length as 240 Panhard rods? [140-160][1974]
posted by  someone claiming to be Ted  on Sat Aug 21 07:02 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.