Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2020 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Progressive springs or Heavy Duty Springs with a sagging rear end? 200 1989

posted by  Severious on  Mon Sep 13 03:40 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

My 2 front shocks are leaking a little so I am going to switch all the shocks to Blisteins. My rear springs are sagging a bit after being replaced about two years ago. I am considering putting progressive springs on the whole car but I am afraid they will just end up sagging in the back like the last set. My question is should I just replace the rear springs with some heavy duty ones to prevent sagging? I do not really understand why it happens. I am not sure if this has anything to do with it but I keep maybe 50-100 lbs of stuff in the trunk, spare parts, tools, full size spare, subwoofer. It is a 244 btw.

Thanks in advance.

Scott
--
1989 Volvo 244 DL 215k Miles, the proper color brick red.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Progressive springs or Heavy Duty Springs with a sagging rear end? [200][1989]
posted by  Severious  on Mon Sep 13 03:40 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.