Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2002 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

CR-814 Radio Wiring to Amp 700 1992

posted by  robbmcc on  Wed Sep 22 12:52 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 08:41 CST 2014
[RELATED]

Hi All,
Just bought a CR-814(6 speaker external amp) to replace the CR-718 (4 speaker no amp) on ebay for my 740 turbo and have two questions before I install:
a.) Do I need the 6 pin din cable and the rectangular connector on the amp? I'm confused on what I found in the archives because it sounded like I only needed the din. If I need the rectangular one I'm confused on where the other end is going because the one off the back on the radio goes to speakers,power, etc.
b.) Any chance all the wiring and cable ends will be already in place and ready to go for the amp?
Thanks in advance,
Robb McC






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New CR-814 Radio Wiring to Amp [700][1992]
posted by  robbmcc  on Wed Sep 22 12:52 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.