Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

connector to cold start injector 200 1982

posted by  muskox on  Thu Nov 4 04:46 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Feb 23 04:02 CST 2007
[RELATED]

I would like to replace the female connector to the cold start injector on my B23E engine. Markings on it are "AMP" on one side and "3" on the other. When I ask about this locally, harness replacement is trotted out as the solution. But this is a pretty expensive solution to what is not that big a problem. The rest of the harness is ok; I would just like to replace the connector. Does anyone know where these two prong connectors can be purchased?

Bob

p.s. I would like to thank Dave Shannon for providing me with Brickboard's new URL. If I ever do get around to replacing the whole harness, I will certainly go to him first.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New connector to cold start injector [200][1982]
posted by  muskox  on Thu Nov 4 04:46 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.