Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2004 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Poly Strut Rod Bushings 700

posted by  yipal on  Fri Nov 12 07:37 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Jun 27 22:01 CST 2012
[RELATED]


I just replaced all the bushings in the front end of my 740. I used Poly cone bushings from FCP Groton. I also used poly bushings for the sway bar endlinks. I have the aluminum control arms, so that endlinks are straight rods.

Now, it looks like the endlinks are not straight up and down. I think the poly bushings are bigger than my old bushings, and they are pushing the control arm
forward.

Is this a good idea? Are the endlinks going to break prematurely, or will the endlink bushings fail?

- Alex





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Poly Strut Rod Bushings [700]
posted by  yipal  on Fri Nov 12 07:37 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.