Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Bleeding Brakes all around 200

posted by  johnny6 on  Sun Nov 14 16:02 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I just finished replacing calipers and rotors all around, both parking brakes and the front brake lines on my '87 240 wagon. Whew!

Now I need to bleed the system. Obviously there's got to be alot of air in system. Alot of fluid bled out when I removed the calipers. What's the best way to accomplish this? I'm having a hard time getting any flow to come out of the rear caliper where I've started. I was using one of those pressure bleeders I bought at autozone and not getting much flow.

Also should I leave the MC cap on when doing this or take off? Am I better doing it the old clear tube in a container way?

Any and all help is greatly appreciated.

John

Centerville , Ohio






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Bleeding Brakes all around [200]
posted by  johnny6  on Sun Nov 14 16:02 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.