What do other Brickboarders use to secure the top of the air filter box to the bottom when the plastic hinges that hold the wire latches break? I tried to use a WIX air filter but the foam seal was too thick, so when I tried to latch the top down, the plastic that holds the wire latches broke on two adjoining clips. A new box is $174 at Borton Volvo and my usual supplier of used parts will not sell a used one because the plastic gets brittle over time and breaks. My local junkyards don't have any 940's. As a temporary solution, I drilled a 1/8" hole through the top and bottom lips and used a plastic cable tie.