Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Cascading Injector Failure??? 200 1987

posted by  richink on  Tue Nov 23 13:29 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Dec 22 04:40 CST 2010
[RELATED]

Hello All,

Y'all know it takes a good one to stump me so here goes...

87 245 DL w/LH jetronic

All maintenance stuff done, AMM & IAC good, wiring harness looks ok. In-tank pump dead but on order from FCP, but this seems like something else now.

So it gets to full operating temperature, and from what I can tell, it then starts with #1 losing power, then #2, and then the rest go down in order. You let the car cool off for a little and then it starts roughly and then smooths out, but after 5 mins again at full temp it does the same thing.

Any ideas???

TIA,
--
Happy Bricking!!! - Richard - '87 245 DL , '82 242 GLT - Volvo's are alive and well in Brampton!!!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Cascading Injector Failure??? [200][1987]
posted by  richink  on Tue Nov 23 13:29 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.