Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2005 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

'New' engine - #4 cylinder fires, no others 900 1993

posted by  eadlermn on  Thu Dec 9 16:08 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Dec 7 11:59 CST 2010
[RELATED]

I replaced the engine in my wife's '93 944t. (Bad temp gauge + cracked radiator = overheated engine) Everything is back together, all the fluids are in and not leaking (so far), but I can't get it to start. As I crank it, I can hear it start to catch, but it won't completely start. I put my hand on the exhaust manifold next to each cylinder and #4 gets warm, but none of the others due. If 1 cylinder is firing, what would cause the others not to?

I've swapped out the cap and rotor and tried new wires. The plugs look fine, and swapping another cylinder's plug into #4 doesn't make any difference.

I'm not sure where to go and the wife is getting antsy to get her car back.

Thanks for any help!
-Eric






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 'New' engine - #4 cylinder fires, no others [900][1993]
posted by  eadlermn  on Thu Dec 9 16:08 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.