Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

What went wrong (tranny mount replacement) 200 1989

posted by  haroon on  Mon Dec 13 01:07 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Feb 20 11:25 CST 2014
[RELATED]

I replaced the tranny mount (auto) this weekend. Last one lasted about a 100k miles. Also noticed the output shaft is on it's way out. Thats a spring project.

Anyway started the car, drove it around, no problems. Came back and jacked up the rear end to inspect the rear end. I am still get a vibration when moving from a stop. Rear end needs some bushing work. Put the wheels back and now I get a cluking noise when I start it. It sonuds like the drive shaft is hitting the body when starting.

I reinspected everything, trany mount is fine and torqued. Front mounts are fine. Drive shaft support was replaced recently. Drives fine, just a clunk when I start it. Also the exhasut is fine, plent of clearance.

Should I reinstall it?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New What went wrong (tranny mount replacement) [200][1989]
posted by  haroon  on Mon Dec 13 01:07 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.