Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

transmission bushing and seal 200 1984

posted by  jaydee on  Tue Dec 21 08:35 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 23:45 CST 2014
[RELATED]

What is the skinny on replacing the rear bushing on the AW70 tranny?
I have suffered with a high frequency vibration akin to that produced by an orbital sander, and expressed through the steering wheel, since I bought this car three months ago. I have replaced motor and transmission mounts, and gone through a number of gyrations trying to track down the source of this annoyance. I noted last night that there seem to be a few drops of oil on my driveway now, which I hope come from the transmission output, thereby proving that the vibration is due to a worn bushing/seal.
Is the replacement of these items a 2 hour or 20 hour job? Any words of wisdom of doing this myself on the floor of my gargage?
TIA
J Dymond
65 1800S
74 Jensen Healey (the outcast, still for sale)
84 240GLE
89 760GLE
92 960GLE






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New transmission bushing and seal [200][1984]
posted by  jaydee subscriber  on Tue Dec 21 08:35 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.