Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2008 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

How the heck do I replace the brake light bulb in trunk window tail light housing in 1991 940 GLE wagon? 900

posted by  blown cue on  Thu Jan 13 05:18 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Please don't tell me to look in the FAQ.

I did already. There's one line and it's lame.

The housing slides onto the wagon trunk window and is held in place by two screws. I unscrew and slide off and the housing will hang by two wires, yellow and black. There are several pieces of plastic, and the bulb receptor and I haven't a clue how to remove the bulb or bulb receptor to replace the brake light bulb. I just got the wagon and I don't have a Haynes or Chilton manual. VLVworld is not helpful.

Please be as detailed as you can. e.g. to the level where if you are telling someone to remove a battery terminal from a post, you mention that you use a 10mm combination wrench to do so. Thanks in advance.

If I sound churlish, it's because I just spent a s---load of money to replace the entire timing belt assembly. I'm not a DIY mechanic. And it's raining.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New How the heck do I replace the brake light bulb in trunk window tail light housing in 1991 940 GLE wagon? [900]
posted by  blown cue  on Thu Jan 13 05:18 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.