Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Starter inhibiter/reverse light switch 200

posted by  ahusby on  Sun Jan 16 14:10 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Jul 22 06:29 CST 2001
[RELATED]

I'm having trouble figuring out the wires on a nuetral safety switch from a late 70's 240. This switch was mostly used in Europe on column shift cars. It mounts on the transmission on the same shaft as the gear selector, only on the passenger side. It has 2 wires about 14 gage, 1 blue, and 1 blue and red. It also has 3 more wires grouped together about 18 gage, 1 red, 1 brown, and 1 blue and yellow.

I'm installing a AW70 into my 122s and the wiring is basically 1 black and 1 yellow that connect to the switch and then go to ground.

Any help would be extremely appreciated.

Alan






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Starter inhibiter/reverse light switch [200]
posted by  ahusby subscriber  on Sun Jan 16 14:10 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.