Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Engine wiring harness question 200 1984

posted by  ldray on  Sun Jan 23 06:08 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Feb 23 01:23 CST 2001
[RELATED]

I'm trying to keep my daughter's '84 240 wagon alive 'til spring. I just purchased it a month ago, with about 100,000 miles on the odometer. Engine runs strong, good brakes, good suspension. It seems just about everything else has been neglected. I am prioritizing my jobs, and the car has a good deal of potential.
It starts up, runs well, and just passed inspection.

My worry is the terribly degraded insulation on the engine wiring harness. It seems that the driver's side of the harness is in very good shape. I thought of purchasing a harness on ebay, but they've been going for $200 used. That seems pretty steep.

My question is, do I need both sides of the engine harness? I was thinking of replacing the one side with the best automotive wire and connectors I could find.

Your opinions would be appreciated~

Thanks in advance,

Larry






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Engine wiring harness question [200][1984]
posted by  ldray subscriber  on Sun Jan 23 06:08 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.