Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2012 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

ATF cooler lines r/r 700 1990

posted by  guysaab on  Sun Jan 23 17:43 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jun 23 13:24 CST 2014
[RELATED]

I recently found a leak from one of my ATF cooler lines, tonight I started the job of replacing them. As I was undoing the lower (trans) fittings, I realized that each line had been rotating with the retaining nut I had removed, to a point that each twisted until they broke at about the middle.

My question is, as I install the new lines are there any precautions I will need to take to avoid this twisting, or was the problem tonight due solely to 250K gunking the lines at these lower points?

Thanks in advance,
Brent






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ATF cooler lines r/r [700][1990]
posted by  guysaab  on Sun Jan 23 17:43 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.