Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

262C Bertone - Rust Problems 200

I've just (rather foolishly) bought a 262C. It seems sound mechanically and the interior is in very good shape, but there a few areas of rust which need immediate attention. Most noticeably, the panel in front of the screen (where the wipers are) is full of thick cracked filler and is blistering badly - I'm assuming that this is probably a difficult and expensive area to repair properly - is it terminal? Anyone had it repaired successfully?
There's also some evidence of filler at the base of the C-pillars (but I couldn't feel any rust through the vinyl on the pillars themselves), forward door edges and some large blisters ahead of the rear arches. The sills appear to have been repaired fairly recently and the underside is solid.

Is there anywhere else I should have a closer look at?

Thanks in advance.

Philip






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 262C Bertone - Rust Problems [200]
posted by  someone claiming to be Philip  on Wed Feb 2 08:02 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.