Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2016 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Vacuum Hose Connection Question for 93 945T w/EGR 900 1993

posted by  pbonsalb on  Sat Feb 5 11:12 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri May 9 09:43 CST 2008
[RELATED]

I just swapped an engine from a 93 945T with EGR into a 93 945T that may or may not have had EGR (I am using the fuel computer from the EGR car), and do not remember the vacuum hose connections. I have three hoses to connect and two spare connectors on the intake manifold.

To what does the vacuum hose from the EGR valve connect?

To what does the small hard plastic line coming from the middle of the firewall connect to (one hard plastic line goes to the heater control valve)? This one has a check valve on it, but I don't know where it goes.

One half of the T hose from one of the intake connections goes to the compressor bypass valve. What does the other half connect to? The line is pretty long.

Thanks,

Philip Bradley






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Vacuum Hose Connection Question for 93 945T w/EGR [900][1993]
posted by  pbonsalb  on Sat Feb 5 11:12 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.