Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Ball joint orientation 200 1989

uid 25253's pic
posted by  Cabbie2169 on  Thu Feb 10 06:03 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I've been informed that I have the ball joint mounting plates reversed. Currently, the ball joint mounting plates are oriented such that the straight edge is parallel to the front (or leading) edge of the control arm.

To my knowledge, there is no difference between the actual left and/or right joint. Correct?

Also..if the ball joint mounting plates are installed on the wrong side of the vehicle, what effect could this have? Is it dangerous in any way?
Thanks in advance,
Cabbie2169





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Ball joint orientation [200][1989]
posted by  Cabbie2169  on Thu Feb 10 06:03 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.