Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Inner tie rod ends. What's the scoop?? How do you know if they're bad? Hard? 200 1989

uid 25253's pic
posted by  Cabbie2169 on  Fri Feb 11 08:59 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

The grease monkeys at Big Ten Tire said "No" to a front end alignment. I had noticed previously on my own that the driver's side wheel kind of moved when you grabbed at 9 and 3 o'clock and shook. I have new ball joints (which I finally figured out how the correct orientation goes), tie rod ends, struts (Sachs Advantage), strut mounts, and control arm bushings. Now this.

The grease monkeys said that it was the inner tie rod ends. Bentley manual nor Haynes address. How much for parts and how hard to fix??
Cabbie2169






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Inner tie rod ends. What's the scoop?? How do you know if they're bad? Hard? [200][1989]
posted by  Cabbie2169  on Fri Feb 11 08:59 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.