Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2001 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

front sway bar installation 900 1995

posted by  guri r on  Tue Feb 15 12:50 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu May 8 22:46 CST 2014
[RELATED]

What is with this "preloading" of the front bars described in the FAQs? The IPD instructions call for raising the suspension only if you have trouble getting the top nut on the endlink. Not the case on this car. The endlink is high enough for the nut to go on easily. Also, any suggestions for torque on the brackets for the bar? The car is a '95 945T. I am about to tighten things up and lower the front end, and I didn't "preload" it; just followed the IPD instructions. Any thoughts/observations appreciated. Thanks.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New front sway bar installation [900][1995]
posted by  guri r subscriber  on Tue Feb 15 12:50 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.